Chat with us 24/7
Do you need to replace the filter for your pet water fountain?
Pets need fresh water all the time, so it's important to keep their water fountain running properly. But what if you can't always be home to fill it? That's where filter refills come in. These filters clean the water as it flows through them, removing any unwanted contaminants. If your pet fountain is old and needs a new filter refill, now is the time to do it!
What is a water filter and what does it do?
Water filters are designed to remove contaminants from water, such as chlorine, lead, and chloramine. Water filters can be installed in your home or office, and some models are portable.
A water filter removes contaminants by passing water through a filtration media. Most water filters use a combination of materials such as activated carbon, sand, and charcoal to remove contaminants. Some filters also use ion exchange resins to remove dissolved ions from the water.
Some common types of water filters are:
Carbon filters - These use activated carbon to remove chlorine and other chemicals from drinking water. They can be either permanent or disposable units that fit into your faucet or refrigerator dispenser.
Under-sink reverse osmosis systems - These systems use pressure to force water through a membrane that traps contaminants like lead and mercury from drinking water before allowing it into your home's plumbing system.
Pitcher-style filters - These attach directly to your faucet and filter out particles in addition to chlorine tastes and odors from tap water before it enters your glass or pitcher.
What types of filters are available for pet water fountains?
Finding the right filter for your pet water fountain can be a daunting task. There are many types and styles of pet water fountains, and each requires a specific type of filter. Here are some of the most common types of filters and their corresponding needs: carbon filters: are used to remove chlorine, bad tastes, and odors from the water
used to remove chlorine, bad tastes, and odors from the water mineral filters: used to remove impurities such as metals, sediment, and chemicals
used to remove impurities such as metals, sediment, and chemicals charcoal filters: used to remove bad taste and odor from the water
used to remove bad taste and odor from the water ultraviolet (UV) sterilization filters: used in conjunction with a UV light to kill bacteria or fungus in the water used in conjunction with a UV light to kill bacteria or fungus in the water activated carbon filters: are made of carbon and can adsorb chemicals and heavy metals are made of carbon and can adsorb chemicals and heavy metals pleated paper filters: are made of high-quality paper that is tightly bound together and can remove large particles and bacteria.
How to change the filter on a pet water fountain?
The filter is the most important part of your pet fountain. You should change it every 2-3 months or as needed. Most filters are replaceable and can be purchased at local pet stores or online.
If your dog drinks a lot of water, you may need to replace it more often, as it will wear out faster. The replacement filters come in various sizes and shapes, so make sure to get one that matches your current filter.
Follow these steps to properly change your pet fountain filter:
Turn off the faucet and remove the top cover from the fountain.
Gently pull out the old filter cartridge from its housing (it may be stuck in place).
Clean any debris from inside the housing with warm water and soap, if necessary. Rinse well with clear water.
Insert a new filter cartridge into its housing and carefully push it down until it snaps into place. Replace any other parts that need replacing at this time as well.
Replace all covers on your fountain and turn on your faucet again to check for leaks before filling your fountain with fresh water and turning on your pets' drinking stations again!
How often should you replace the filter on my pet water fountain?
The filter in a pet water fountain needs to be replaced every six months. The reason for this is that it can become clogged over time and not provide adequate water flow or filtration.
It's important to note that some pet fountains have filters built into the pump housing, while others use cartridges with replaceable filters. The former is generally more expensive than the latter, but they also tend to last longer.
If you're using a cartridge-style filter, you should replace it every six months. If you're using an integrated-filter pump system, you can expect them to last up to two years before needing replacement.
What if my pet water fountain isn't leaking?
If the water is still flowing, then it most likely isn't leaking. The water should be running through the filter, but the pump may be clogged. This would cause the pressure to build up inside the pump and not let any water out. You can try taking apart the pump and cleaning it with vinegar or bleach. If that doesn't work then you'll have to replace it. You can find replacement pumps on Amazon or at a local pet store near you.
If your fountain is not running at all, then there could be a problem with either the power adapter or with one of the tubes in your fountain itself that connects to the pump or filters. It's hard to diagnose this without seeing your fountain first hand though so I would recommend taking it back to where you bought it from and having them look at it for free under their return policy if possible as long as you haven't used more than 30 days past purchase date (usually 90 days).
It is always a good idea to check the filter on your pet water fountain every few months, and replace it as needed. This will help keep your pet safe and healthy, and ensure that their water stays clean.